Hinge Type Feed through Terminal Blocks in Poly 66
These Terminal Blocks are preferred for application where the connections are subjected to severe vibration. The wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The hinged carrier should be lifted to insert the lugs and then snapped into position. The nut can then be fastened to complete the connection. The nut can be operated using a standard screwdriver.
These Terminal Blocks have IP20 (Finger Safe) protection and do not need any additional shrouding. Two lugs can be connected to the Terminal without sacrificing the safety of the Terminal Block.
Technical Details:
| STH3 | STH4 | STH6 | |
|---|---|---|---|
| Material | PA66 | PA66 | PA66 |
| Dimensions Width X Length Height-Din 35 / 35-15 / 32 |
9 X 47 mm 47.2 / 54.7 / 52.1 mm |
11 X 46 mm 52.2 / 59 / 56.4 mm |
18 X 63.5mm 63 / 70.1 / 69.5 mm |
| Clamping Range: Stranded Wire |
1.5 – 6 sq.mm | 1.5 – 6 sq.mm | 1.5 – 35 sq.mm |
| Rated Voltage | 1000V | 1000V | 1000V |
| Current Rating | 41 Amp | 41 Amp | 125 Amp |
For More Details Contact:
CONNECTWELL INDUSTRIES PVT. LTD.
D-7, Phase II, MIDC, Dombivli – 421 204 INDIA
Tel.: +91 251 3980 600, 3980 800; Fax: +91 251 3980 700
Email: [email protected], Website : www.connectwell.com
